What precautions should be taken when using a high-speed centrifuge

    When choosing a high-speed centrifuge, the higher the centrifuge speed, the better the separation effect will be. However, we also need to pay attention to some details during the entire use process. High speed centrifuges require more attention to operation. If used blindly, it may affect the normal use of the centrifuge. What should be noted when operating a high-speed centrifuge specifically? Let's give a brief introduction below.

    When using a high-speed centrifuge, we must first ensure that the entire workbench is flat and sturdy, without any protrusions, and that the entire operating workshop is neat and clean. We must ensure ventilation and a certain degree of dryness. Before turning on the power, we must check and inspect the centrifuge in advance. Only after there are no problems can we turn on the power switch.

    After the indicator light is on, subsequent operations can be carried out. Only after confirming that the instruction light is on, can we ensure the registration and operation of the centrifuge. Of course, this is just a simple measure, and it is not directly necessary to turn off the power switch after entering the operation coordination.

    Then turn on the centrifuge to clean the inner chamber or turn the head, place the test tube with consistent measurement, and close the cover of the centrifuge, so that the power can be turned on again regularly, and then adjust the required speed.

    Now we have a better understanding of the correct use and operation of high-speed centrifuges. When wiping the rotor or inner compartment, it is important to turn off the power and close the centrifuge cover, otherwise it may pose certain safety issues to our operation.

    And before each shutdown, it is necessary to rotate the speed to the minimum position before turning off the power switch. Otherwise, turning off the power switch during high-speed operation may affect the use of the rotor.