MODEL: CK6180

Bed structure & Rail：Flat Bed CNC lathe- Hard Rail

Swing over bed mm  Φ800 

Swing over cross slide mm  Φ560

Distance between center  mm  1000  1500  2000 3000 

1. Controller - GSK, SIEMENS or FANUC
2. Spindle Motor - 4/5.5kw, GSK Servo motor
3. Spindle Speed - 4000rpm, ø56mm (ø40mm)
4. Chuck - 160mm (6''), Hollow hydraulic chuck
5. Turret - 8 position, Servo turret, □20*20mm
6. Tailstock - Hydraulic Tailstock

1. Controller - GSK, SIEMENS or FANUC
2. Spindle Motor - 5.5/7.5kw, GSK Servo motor
3. Spindle Speed - 4000rpm, ø56mm (ø40mm)
4. Chuck - 160mm (6''), Hollow hydraulic chuck
5. Turret - 8 position, Servo turret, □20*20mm
6. Tailstock - Hydraulic Tailstock

1. Controller - GSK, SIEMENS or FANUC
2. Spindle Motor - 7.5/11kw, GSK Servo motor
3. Spindle Speed - 4000rpm, ø66mm (ø50mm)
4. Chuck - 200mm (8''), Hollow hydraulic chuck
5. Turret - 8 position, Servo turret, □25*25mm
6. Tailstock - Hydraulic Tailstock

1. Controller - GSK, SIEMENS or FANUC
2. Spindle Motor - 11/15kw, GSK Servo motor
3. Spindle Speed - 4000rpm, ø66mm (ø50mm)
4. Chuck - 200mm (8''), Hollow hydraulic chuck
5. Turret - 8 position, Servo turret, □25*25mm
6. Tailstock - Hydraulic Tailstock